| Material toothed belt | Polychloroprene with glass fibre | ||
| Material pulleys | High-alloy stainless steel | ||
| Material guide slide | Tempered steel | ||
| Material cover tape | Stainless steel strip | ||
| Material profile | Anodised wrought aluminium alloy | ||
| Logic interface, plug pattern | 00992264 | ||
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
| IO-Link, connection technology | Plugs | ||
| Switching logic for outputs | PNP (positive switching) | ||
| IO-Link, Data storage required | 500 Byte | ||
| IO-Link, Service data IN | 32-bit force 32-bit position 32-bit speed | ||
| IO-Link, Process data length IN | 2 bytes | ||
| IO-Link, Process data length OUT | 2 bytes | ||
| IO-Link, Port class | A | ||
| IO-Link, Protocol version | Device V 1.1 | ||
| IO-Link, SIO-Mode support | Yes | ||
| Specification logic input | Based on IEC 61131-2, type 1 | ||
| Number of digital logic outputs 24 V DC | 2 | ||
| Weight of slide | 55 g | ||
| Moving mass | 169 g | ||
| Torsional mass moment of inertia It | 8.500 mm⁴ | ||
| Max. feed force Fx | 75 N | ||
| Max. moment My | 4,7 Nm | ||
| Max. force Fz | 600 N | ||
| Features of digital logic outputs | Configurable Not galvanically isolated | ||
| Max. speed | 1,2 m/s | ||
| Ready status indication | LED | ||
| Additional functions | User interface Integrated end-position sensing | ||
| Rotor position sensor, encoder measuring principle | Magnetic | ||
| Referencing | Positive fixed stop block Negative fixed stop block | ||
| Symbol | 00997293 | ||
| Design | Electromechanical linear axis With toothed belt With integrated drive | ||
| Mounting position | Horizontal | ||
| Toothed-belt stretch | 0,187 % | ||
| Size | 45 | ||
| Effective diameter of drive pinion | 19,1 mm | ||
| 2nd moment of area Iy | 140.000 mm⁴ | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Degree of protection | IP40 | ||
| Storage temperature | -20 °C ... 60 °C | ||
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| KC mark | KC-EMV | ||
| Power supply, connection pattern | 00995989 | ||
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
| Permissible voltage fluctuations | +/- 15% | ||
| Parameterisation interface | IO-Link User interface | ||
| Nominal voltage DC | 24 V | ||
| Max. current digital logic outputs | 100 mA | ||
| Duty cycle | 100% |
| Material slide | Die-cast aluminium | ||
| Material guide rail | Tempered steel | ||
| Material drive cover | Painted die cast aluminium | ||
| Note on materials | RoHS-compliant | ||
| Material end cap | Painted die cast aluminium | ||
| Logic interface, number of pins/wires | 8 | ||
| Logic interface, connection type | Plug | ||
| Switching logic for inputs | PNP (positive switching) | ||
| Max. cable length | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
| IO-Link, Min. cycle time | 1 ms | ||
| IO-Link, Process data content IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) | ||
| IO-Link, Process data content OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
| IO-Link, Number of ports | 1 | ||
| IO-Link, communication mode | COM3 (230.4 kBaud) | ||
| Features of logic input | Configurable Not galvanically isolated | ||
| Working range of logic input | 24 V | ||
| Number of digital logic inputs | 2 | ||
| Product weight | 3.630 g | ||
| Moving mass for 0 mm stroke | 169 g | ||
| Feed constant | 60 mm/U | ||
| Reference value effective load, horizontal | 2,5 kg | ||
| Max. moment Mz | 4,7 Nm | ||
| Max. moment Mx | 5,5 Nm | ||
| Max. force Fy | 300 N | ||
| Repetition accuracy | ±0.1 mm | ||
| Max. acceleration | 6 m/s² | ||
| Display | LED | ||
| Temperature monitoring | Switch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output | ||
| Rotor position sensor | Absolute single-turn encoder | ||
| Position detection | Motor encoder Via proximity switch | ||
| Type of motor | Stepper motor | ||
| Guide | Recirculating ball bearing guide | ||
| Toothed-belt pitch | 2 mm | ||
| Stroke reserve | 0 mm | ||
| Working stroke | 800 mm | ||
| 2nd moment of area Iz | 170.000 mm⁴ | ||
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
| Protection class | III | ||
| Relative air humidity | 0 - 90% | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Approval | RCM trademark | ||
| Power supply, number of pins/wires | 4 | ||
| Power supply, connection type | Plugs | ||
| Rotor position transducer resolution | 16 bit | ||
| Nominal current | 5,3 A | ||
| Max. current consumption | 5.300 mA | ||
| Insulation protection class | B |
Cookies are small text files that can enhance a user's experience on websites
The law stipulates that we can store strictly necessary cookies on your device for the proper functioning of this site. For other types of cookies, we require your permission. This means necessary cookies are processed under GDPR Art. 6 (1) (f), while all other cookies, such as those in the preferences and marketing categories, are processed under GDPR Art. 6 (1) (a) GDPR.
cookies.cookies_about_type
You have the option to change or withdraw your consent at any time through the Cookie Declaration on our website.
Find more information about our identity, how to contact us, and our personal data processing practices in our Privacy Policy.
