163430 Festo

FESTO 163430 end cap module

Name: 163430 FESTO
Brand: FESTO
SKU: 711157-en-eur
Price: 604.61 EUR
Availability: SoldOut

DNC-80-80-PPV-A-S2

604.61 €

Limited stock only available on quotation

Specifications

Series (DNC)	Standards-based cylinder, double-acting, based on ISO 15552
Piston diameter [mm] (80)	80
Stroke [mm] (80)	80
Cushioning (PPV)	Pneumatic cushioning, adjustable at both ends
Position sensing (A)	For proximity sensor
Protection against rotation	None
Piston rod type (S2)	Through piston rod
Piston rod thread type	Male thread
Custom thread	None

Special spanner flats	Standard
Piston rod extension	None
Improved running performance	None
Temperature resistance	Standard
Constant motion	None
Running characteristic	None
Corrosion protection	Standard
Scraper	Standard

Technical data

Material cylinder barrel		Wrought aluminium alloy Smooth anodised
Note on materials		RoHS-compliant
Type of mounting		Via female thread With accessories
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		2.721 N
Impact energy in end positions		0,9 J
Corrosion resistance class CRC		2 - Moderate corrosion stress 3 - high corrosion stress
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ambient temperature		-20°C <= Ta <= +60°C
Explosion ignition protection type for gas		Ex h IIC T4 Gb
ATEX category gas		II 2G
CE marking (see declaration of conformity)		To UK EX instructions
Mode of operation		Double-acting
Protection against torque/guide		Square piston rod
Position detection		Via proximity switch Without
Mounting position		optional
Based on standard		ISO 15552
Stroke		3 mm ... 2.000 mm

Material cover		Die-cast aluminium Coated
Pneumatic connection		G3/8
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		2.721 N ... 3.016 N
Max. torque for protection against torsion		3 Nm
Ambient temperature		-40 °C ... 120 °C
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Explosion protection certification outside the EU		EPL Db (GB) EPL Gb (GB)
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
ATEX category dust		II 2D
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Operating pressure		12 bar
Variants		With end-position locking on both sides With end-position locking at rear With end-position locking at front Improved running performance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with external hexagon Extended piston rod Clamping unit on the piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80°C Monostable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on right, unactuated piston rod, advanced Bistable valve, mounted on right, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, retracted Monostable valve, mounted on left, unactuated piston rod, advanced Bistable valve, mounted on left, unactuated piston rod, retracted Piston rod at one end
Design		Piston Piston rod Profile barrel
Cushioning		Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends
Piston diameter		80 mm