8044310 Festo

FESTO 8044310 cover module

Name: 8044310 FESTO
Brand: FESTO
SKU: 832033-en-eur
Price: 150.04 EUR
Availability: SoldOut

DFPI-125-...-ND2P-E-NB3P

150.04 € ~~253.82 €~~ -40%

Limited stock only available on quotation

Specifications

Stroke	40 mm ... 990 mm
Operating Pressure	43,5 psi ... 116 psi
Mounting Position	optional

Pneumatic connection	G3/8 G1/2 For tubing O.D. 8 mm With specific accessories
Weight	7.50Kg

Technical data

Material cylinder barrel		Smooth-anodised wrought aluminium alloy
Material fitting		Nickel-plated brass High-alloy stainless steel
Material screws		Coated steel High-alloy stainless steel
pipe material		High-alloy stainless steel
Material piston rod		High-alloy stainless steel
Material underneath cover		Die-cast aluminium, coated
Note on materials		Contains paint-wetting impairment substances RoHS-compliant
Electrical connection		2-pin 3-pin 4-pin 5-pin A-coded Cable connector M16x1.5 M12x1 Straight plug connector/screw terminal Straight plug With specific accessories
Repetition accuracy in ± %FS		1 %FS
Hysteresis		0,4 mm
Basic weight for 0 mm stroke		7.500 g
Moving mass for 0 mm stroke		1.900 g
Air consumption on return stroke per 10 mm		0,803 l
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		6.881 N
Ambient temperature		-20 °C ... 80 °C
Degree of protection		IP65 IP67 IP69K NEMA 4
Storage temperature		-20 °C ... 80 °C
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Explosion ambient temperature		-20°C <= Ta <= +60°C
Explosion ignition protection type for gas		Ex h IIC T4 Gb
ATEX category gas		II 2G
CE marking (see declaration of conformity)		To UK instructions for EMC To UK EX instructions To UK RoHS instructions
KC mark		KC-EMV
Power supply		2-wire
Recommended wiper current		< 0,1 µA
Analogue output		4 - 20 mA
Operating pressure		43,5 psi ... 116 psi
Functional principle of measuring system		Potentiometer
Position detection		With integrated displacement encoder
Mode of operation		Double-acting
Cushioning		No cushioning
Piston diameter		125 mm
Size of valve actuator		125

Material tie rod		High-alloy stainless steel
Material static seals		NBR
Material tubing		PE
Material piston rod wiper		NBR
Material electrical connection		Nickel-plated brass High-alloy stainless steel
Material end cap		Coated wrought aluminium alloy
Pneumatic connection		G3/8 G1/2 For tubing O.D. 8 mm With specific accessories
Repetition accuracy in ± mm		0,7 mm
Non-dependent linearity		±0.05%
Additional weight per 10 mm stroke		134 g
Additional moving mass per 10 mm stroke		53 g
Air consumption on advance stroke per 10 mm		0,859 l
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		7.363 N
Impact energy in end positions		1 J
Vibration resistance to DIN/IEC 68 Part 2-6		Tested to severity level 2
Relative air humidity		5 - 100% Condensing Non-condensing
Continuous shock resistance to DIN/IEC 68 Part 2-82		Tested to severity level 2
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
ATEX category dust		II 2D
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity)		To EU EMC Directive To EU Explosion Protection Directive (ATEX) In accordance with EU RoHS Directive
Approval		RCM trademark
Max. wiper current, short-time		10.000 µA
Operational voltage range DC		9 V ... 30 V
Nominal operating pressure		6 bar
Reverse polarity protection		yes
Symbol		00992807
Design		Piston Piston rod Tie rod Cylinder barrel
Mounting position		optional
Based on standard		ISO 15552
Stroke		40 mm ... 990 mm