| Db min - Min stop ring position diameter | 162 mm | ||
| ra max - Max shaft & housing fillet radius | 1,5 mm | ||
| da min - Min shoulder diameter IR | 108 mm | ||
| FTF - Characteristic cage frequency | 0,44 Hz | ||
| BPFO - Characteristic outer ring frequency | 6,595 Hz | ||
| Tmin - Min operating temperature | -25 °C | ||
| f0 - Coefficient | 15.90 | ||
| C0 - Static load | 54 kN | ||
| Radial clearance class | CN | ||
| f - Stop ring thickness | 2,82 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| b min - Min groove width | 3,1 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| Ca max - Max segment position | 6,53 mm | ||
| a max - Max position groove | 3,71 mm | ||
| Brand | NTN |
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Da max - Max shoulder diameter OR | 142 mm | ||
| BSF - Characteristic rolling element frequency | 8,168 Hz | ||
| BPFI - Characteristic inner ring frequency | 8,405 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Grease lubrication limit speed | 4200 tr/min | ||
| Cu - Fatigue limit load | 3,5 kN | ||
| C - Dynamic load | 66,5 kN | ||
| Snap ring reference | R150 | ||
| D4 max - Max outer diameter of assembled stop ring | 159,7 mm | ||
| b max - Max groove width | 3,4 mm | ||
| D3 - Max bottom groove diameter | 145,24 mm | ||
| rs - Min fillet radius | 1,5 mm | ||
| Ca min - Mini segment position | 6,17 mm | ||
| a min - Min position Groove | 3,45 mm |
