a)
Reference edge
b)
Length
| B (Recommended design: No reference edge on opposite side (V1) and align parallel over shafts. ) | 42 | ||
| E2 | 30 | mm | |
| H2 | 12.50 | mm | |
| m | 11 | ||
| O2 (ISO 4762-8.8, recommendation applies for bolting in steel or cast iron threads.) | M10x25 | ||
| T1 | 15.30 | mm | |
| U (DIN 7980, discontinued. Spring washer commercially available.) | 10 | ||
| V1 (Recommended design: No reference edge on opposite side (V1) and align parallel over shafts. ) | 7 | mm |
| E1 | 12 | mm | |
| H1 (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 72 | mm | |
| H2 (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 12.5 mm ±0.012 | ||
| O1 (ISO 4762-8.8) | M10x60 | ||
| T | 50 | mm | |
| T2 | 13.50 | mm | |
| V | 25 | mm |
| L | 600 | mm | |
| m | 1.90 | kg |
| Tolerance for L | - 500 µm - 1500 µm |
