| A | 74 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 53 mm ±0.05 | ||
| M1 | 14 | ||
| O1 (ISO 4762-8.8) | M10x40 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 150 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 10 | mm | |
| V | 8 | mm |
| e | 51 | ||
| m | 11 | ||
| N | 17 | mm | |
| O2 (ISO 4762-8.8 oder ISO 4017-8.8, only applicable for bolting with steel or cast iron threads. ) | M8x25 | ||
| T | 14 | mm | |
| U2 (DIN 125) | 8 | mm |
| m | 8.50 | kg |
