| Bore diameter bearing | d | 30 | mm |
| Width inner ring | B | 37 | mm |
| Basic static load rating, radial | C0r | 95,900 |
| Outside diameter bearing | D | 55 | mm |
| Basic dynamic load rating, radial | Cr | 114,000 |
| Edge Spacing | r1smin | 0.30 | mm |
| Ball diameter | dK | 50.80 | mm |
| Outer eye diameter | d2 | 70 | mm |
| Shank diameter | d4 | 40 | mm |
| Width of the rod end | C1 | 25 | mm |
| Thread length Internal thread | l3 | 51 | mm |
| length rod end shank | l5 | 15 | mm |
| Shank diameter, large | d5 | 50 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Bore diameter bearing, tolerance | dT | H7 |
| Outer flange diameter inner ring | d1 | 34.80 | mm |
| Thread size | d3 | M30x2 | |
| Shank Length Internal thread head | h1 | 110 | mm |
| Tilt angle | α | 17 | ° |
| Total length internal thread head | l4 | 145 | mm |
| Distance drilling with/shaft start | l7 | 37 | mm |
| Width Across Flat | W | 41 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0.02 | mm |
| Width inner ring, lower tolerance | BUT | -0.12 | mm |
