| Ball diameter | dK | 105 | mm |
| Outer eye diameter | d2 | 168 | mm |
| Shank diameter | d4 | 90 | mm |
| Width of the rod end | C1 | 66 | mm |
| Thread length Internal thread | l3 | 86 | mm |
| Distance drilling with/shaft start | l7 | 78 | mm |
| Shank diameter, large | d5 | 148 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Cylinder Force | FZ | 320,000 | |
| Bore diameter bearing, upper tolerance | dOT | 0.03 | mm |
| Width inner ring, lower tolerance | BUT | -0.30 | mm |
| Outer flange diameter inner ring | d1 | 91 | mm |
| Thread size | d3 | M64x3 | |
| Shank Length Internal thread head | h1 | 180 | mm |
| Tilt angle | α | 4 | ° |
| Total length internal thread head | l4 | 270 | mm |
| Welding Shank Diameter | d 7 | M16x45 | |
| Width | B | 48 | mm |
| Radial Clearance | Gr | 0,055 - 0,142 | |
| Tightening torque | MA | 195 | Nm |
| Bore diameter bearing, tolerance | dT | H7 |
| Bore diameter bearing | d | 80 | mm |
| Width inner ring, | B | 80 | mm |
| Basic static load rating, radial | C0r | 528,000 |
| Outside diameter bearing | D | 120 | mm |
| Basic dynamic load rating, radial | Cr | 402,000 |
| Manufacturer | Part Number |
|---|---|
| SKF | SIQG80 ES (SKF) |
