FESTO 609179 integrated drive

Name: 609179 FESTO
Brand: FESTO
SKU: 715451-en-eur
Price: 1164.6 EUR
Availability: SoldOut

EMCA-EC-67-M-1TE-CO-S1

1,164.60 € ~~1,843.95 €~~ -36%

Limited stock only available on quotation

Specifications

Electrical connection (T)	Terminal box
Measuring unit (E)	Encoder
Brake	None
Bus protocol/activation (CO)	CANopen
Degree of protection, electrical system (S1)	IP65

Note on materials		Contains paint-wetting impairment substances RoHS-compliant
Switching logic for outputs		PNP (positive switching)
Ethernet, supported protocols		TCP/IP
Working range of logic input		24 V
Proof test interval		20 y
Brake holding torque		0 Nm ... 1 Nm
Ambient temperature		0 °C ... 50 °C
Relative air humidity		0 - 95% Non-condensing
Corrosion resistance class CRC		1 - Low corrosion stress
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Certificate issuing authority		TÜV 01/205/5514.00/16 UL E331130
Approval		RCM trademark c UL us - Recognized (OL)
Rotor position transducer resolution		12 bit
SFF Safe Failure Fraction		> 90 %
Nominal voltage DC		24 V
Max. negative test pulse with 1 signal		600 µs
Max. current digital logic outputs		100 mA
Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Brake resistor, external		6 Ohm
Max. rotational speed		3.300 rpm ... 3.500 rpm
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Safety function		Safe torque off (STO)
Rotor position sensor, encoder measuring principle		Magnetic
Controller operating mode		PWM MOSFET power output stage Cascade controller with P position controller PI speed controller PI current regulator

Type of mounting		Screw-clamped With through-hole
Switching logic for inputs		PNP (positive switching)
Features of logic input		Galvanically connected to logic potential
Specification logic input		Based on IEC 61131-2
Nominal torque		0,37 Nm ... 0,45 Nm
Note on ambient temperature		Power must be reduced by 1.75% per °C at ambient temperatures above 20°C.
Degree of protection		IP54 IP65
Storage temperature		-25 °C ... 70 °C
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
KC mark		KC-EMV
Permissible voltage fluctuations		+/- 20 %
Max. number of process sets		64
Parameterisation interface		Ethernet
Nominal power rating of motor		120 W ... 150 W
Max. positive test pulse with 0 signal		10.000 µs
Hardware fault tolerance		1
Diagnostic coverage		90 %
Nominal rotary speed		3.100 rpm ... 3.150 rpm
Display		LED
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 2
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Rotor position sensor		Absolute single-turn encoder Absolute multi-turn encoder