1463475 Festo

FESTO 1463475 iso cylinder

Name: 1463475 FESTO
Brand: FESTO
SKU: 714206-en-eur
Price: 229.78 EUR
Availability: InStock

DSBC-63-320-PPVA-N3EX4

229.78 € ~~268.08 €~~ -14%

available with 3 to 7 days delivery to United States

Specifications

Series (DSBC)	Standards-based cylinder, double-acting, based on ISO 15552
Protection against rotation	None
Piston diameter [mm] (63)	63
Stroke [mm] (320)	320
Clamping unit	None
End-position locking	None
Piston rod type	At one end
Piston rod thread type	Male thread
Profi le type	Sensor slot on one profi le side only
Running characteristics	Standard
Cushioning (PPV)	Pneumatic cushioning, adjustable at both ends

Position sensing (A)	For proximity sensor
Standard	N3 In accordance with ISO
Corrosion protection	Standard
Temperature range	Standard
Protection against particles	Standard
Scraper variant	None
Special material properties	None
EU certification	None
Piston rod extension	None
Piston rod thread extension	None

Technical data

Material clamping jaws clamping unit		Brass
Material housing end-position locking		Anodised wrought aluminium alloy
Material spring		Spring steel High-alloy stainless steel
Note on materials		Contains paint-wetting impairment substances RoHS-compliant
Type of mounting		Via female thread With accessories Either:
Additional weight per piston rod extension of 10 mm		25 g
Basic weight for 0 mm stroke		1.695 g ... 3.396 g
Moving mass for 0 mm stroke		346 g ... 874 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		1.682 N
Cushioning length		0 mm ... 22 mm
Ambient temperature		-40 °C ... 150 °C
Note on operating and pilot medium		Lubricated operation possible (in which case lubricated operation will always be required)
Explosion protection certification outside the EU		EPL Db (GB) EPL Gb (GB)
Explosion ignition protection type for dust		Ex h IIIC T120°C Db
ATEX category dust		II 2D
Explosion protection		Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity)		To EU Explosion Protection Directive (ATEX)
Operating pressure		0,1 bar ... 12 bar
Unlocking pressure		≥ 1,5 bar
Static holding force of end-position locking		2.000 N
Clamping unit release pressure		3 bar
Static holding force of clamping unit		2.000 N
Variants		For unlubricated operation Clamping unit attached End-position locking at both ends End-position locking with piston rod in retracted position End-position locking with piston rod in advanced position Increased chemical resistance Bellows on bearing cap Hard scraper Extended male piston rod thread Piston rod with female thread Extended piston rod Low friction for balancer applications Metal scraper With protection against rotation Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Sensor slots on 3 profile sides Temperature range 0 to 150°C Temperature range -40 to 80°C Piston rod at one end
Position detection		Via proximity switch
Piston-rod end		Male thread Female thread
Mounting position		optional
Based on standard		ISO 15552
Piston rod thread		M10 M16x1.5
Stroke		1 mm ... 2.800 mm
Material collar screws		Galvanised steel
Material rod wiper		Brass PTFE reinforced
Material cylinder barrel		Smooth-anodised wrought aluminium alloy
Buffer seal material		FPM TPE-U(PU)
Material piston rod		High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel
Material piston end-position locking		Hardened steel

Material piston seal		FPM HNBR TPE-U(PU)
Clamping unit housing material		Anodised wrought aluminium alloy
Material cover		Die-cast aluminium, coated
Pneumatic connection		G3/8
Additional weight per piston rod thread extension of 10 mm		14 g
Additional weight per 10 mm stroke		57 g ... 117 g
Additional moving mass per 10 mm stroke		20 g ... 50 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		1.682 N ... 1.870 N
Max. torque for protection against torsion		1,5 Nm
Impact energy in end positions		0,4 J ... 1,3 J
Corrosion resistance class CRC		2 - Moderate corrosion stress 3 - high corrosion stress
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ambient temperature		-20°C <= Ta <= +60°C
Explosion ignition protection type for gas		Ex h IIC T4 Gb
ATEX category gas		II 2G
CE marking (see declaration of conformity)		To UK EX instructions
Mode of operation		Double-acting
Locking pressure		≤ 0,5 bar
Axial backlash end-position locking		1,5 mm
Mode of operation end-position locking		Positive interlocking with stop cylinder Released through compressed air
Axial backlash clamping unit		0,8 mm
Mode of operation clamping unit		Retracting Advancing Static Released through compressed air Frictional clamping with spring force
Symbol		00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971
Design		Piston Piston rod Profile barrel
Conforms to standard		ISO 15552
Cushioning		Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Torsional backlash at piston rod +/-		-0,45 deg ... 0,45 deg
Piston diameter		63 mm
Material bellows		NBR PA
Material bearing		Bronze Metal polymer compound POM
Material nut		Galvanised steel
Cushioning piston material		Aluminium POM
Material piston rod wiper		FPM HNBR PE TPE-U(PU)
Material piston		Wrought aluminium alloy
Piston clamping unit material		POM