| Material shaft | Nickel-plated steel High-alloy stainless steel | ||
| Material cam | Stainless steel casting Steel High-alloy stainless steel | ||
| Material piston | Die-cast aluminium | ||
| Material spring | Spring steel | ||
| Material cover | Die-cast aluminium, coated | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Shaft connection | T17 T22 | ||
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 5,9 l ... 14 l | ||
| Spring return torque at 0° swivel angle | 19,2 Nm ... 57,7 Nm | ||
| Torque at nominal operating pressure and 90° swivel angle | 20,5 Nm ... 161 Nm | ||
| Ambient temperature | -50 °C ... 150 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion ambient temperature | -20°C <= Ta <= +80°C -50°C <= Ta <= +60°C 0°C <= Ta <= +150°C | ||
| Explosion ignition protection type for gas | Ex h IIC T3 Gb X Ex h IIC T4 Gb X Ex h IIC T6 Gb X | ||
| ATEX category gas | II 2G | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Nominal operating pressure | 2 bar ... 6 bar | ||
| Safety Integrity Level (SIL) | Up to SIL 2 High Demand mode | ||
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) | ||
| Closing direction | Closes to the right Closes to the left | ||
| Mode of operation | Double-acting Single-acting | ||
| Fitting connection conforms to standard | ISO 5211 | ||
| End-position adjustment range at nominal swivel angle | -5 deg ... 5 deg | ||
| Swivel angle | 90 deg ... 180 deg | ||
| Size of valve actuator | 160 |
| Material screws | High-alloy stainless steel | ||
| Material bearing | POM PPS reinforced | ||
| Material housing | Anodised wrought aluminium alloy | ||
| Material seals | FPM FVMQ NBR | ||
| Material sub-base | Anodised wrought aluminium alloy | ||
| Pneumatic connection | G1/4 1/4 NPT | ||
| Product weight | 6.082 g ... 7.206 g | ||
| Spring return torque at 90° swivel angle | 38,1 Nm ... 114,2 Nm | ||
| Note on torque | The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. | ||
| Torque at nominal operating pressure and 0° swivel angle | 39,3 Nm ... 161 Nm | ||
| Storage temperature | -20 °C ... 60 °C | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ignition protection type for dust | Ex h IIIC T105°C Db X Ex h IIIC T175°C Db X Ex h IIIC T85°C Db X | ||
| ATEX category dust | II 2D | ||
| Certificate issuing authority | DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19 | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Maritime classification | See certificate | ||
| Operating pressure | 2 bar ... 8 bar | ||
| Connection point for positioner and position sensor conforms to standard | VDI/VDE 3845 size AA 1 | ||
| Symbol | 00991265 00991266 | ||
| Design | Rack and pinion | ||
| Mounting position | optional | ||
| Shaft connection depth | 19 mm ... 24 mm | ||
| End-position adjustment range at 0° | -5 deg ... 5 deg | ||
| Flange hole pattern | F07 F0710 |
