3605478 Festo

FESTO 3605478 controller

Name: 3605478 FESTO
Brand: FESTO
SKU: 670207-en-eur
Price: 1836.11 EUR
Availability: InStock

CMXH-ST2-C5-7-DIOP

1,836.11 €

1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (CMXH)	Controller
Motor type (ST)	Stepper motor ST
Number of axes (2)	2 units
Nominal current (C5)	5 A

Nominal input voltage (7)	48 V DC
Bus protocol/activation (DIO)	Digital I/O interface
Switching input/output (P)	PNP

Technical data

Features of digital logic outputs		Not galvanically isolated
Duration of use Tm		20 y
Certified for safety function to ISO 13849 and IEC 61508 (SIL)		Product can be used in SRP/CS up to SIL 3 (high demand)
SFF Safe Failure Fraction		99 %
Proof test interval		20 y
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level e
LED display, product-specific		POWER: Load voltage applied
Ethernet interface		RJ45 (socket, 8-pin)
Parameterisation		System parameter
Device-specific diagnostics		Diagnostic memory Short circuit in motor winding Undervoltage/overvoltage System- and motor-oriented diagnostics
Programming software		FCT (Festo Configuration Tool)
Note on max. fieldbus transmission rate		1 Mbit/s with CANopen
Communication profile		FHPP
Total number of axes		2
Shock resistance test		EN 60068-2-27
Ethernet, supported protocols		TCP/IP, Modbus TCP
Status displays		7-segment display LED
Power failure bridging		10 ms
Permissible load current		12 A
Mains filter		Integrated
Brake resistance		15 Ohm
Current consumption of logic power supply without clamping brake		0,2 A
Note on digital logic inputs / outputs		Alternatively, 24 V is also possible.
Permissible range for logic voltage		± 15 %
Process interfacing		For 31 sets
Bus connection		Plugs 9-pin Sub-D
Number of digital logic outputs 24 V DC		5
Electrical connection system I/Os		Socket, sub-D, 15-pin
Relative air humidity		0 - 90% Non-condensing
Storage temperature		-25 °C ... 75 °C
Certificate issuing authority		01/205/5519.00/16 TÜV Rheinland
Approval		RCM trademark
Type of mounting		On H-rail via accessories Via screws in slots

Hardware fault tolerance		1
Mean time to dangerous failure (MTTFd)		STO/5700 years
Certified for safety functions to ISO 13849 (PL)		Product can be used in SRP/CS up to category 3, PL e
Diagnostic coverage		90 %
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 3
Safety function		Safe torque off (STO)
LED display, bus-specific		Device: operating status Com: Communication status
Protocol		CANopen FHPP Modbus® TCP
Configuration support		FCT (Festo Configuration Tool)
Dimensions (W x L x H)		50 x 149 x 130 mm
Supported kinematic		Planar surface gantry EXCM
Max. fieldbus transmission rate		100 Mbit/s
Control methods		I/O standalone CAN bus TCP/IP
Protection class		III
Vibration resistance test		EN 60068-2-6
Ethernet, number		1
Note on braking resistor		The 10 ms are not complied with if a brake is integrated.
Current rating per output		100 mA
Nominal current, load supply		10 A
Note on nominal operating voltage of load voltage supply DC		Integrated braking resistor
Max. current consumption, logic power supply with clamping brake and I/O		0,9 A
Permissible range for load power supply		± 10 %
Nominal voltage load voltage DC		48 V
Nominal voltage for logic power supply DC		24 V
Controller operating mode		Direct operation Set selection
Note on power failure buffering		Digital logic inputs/outputs are only available in I/O mode.
Number of digital logic inputs		8
Fieldbus link		1x CANopen Slave
Note on materials		RoHS-compliant
Degree of protection		IP20
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
Product weight		700 g
Ambient temperature		0 °C ... 50 °C