| Bore diameter | d | 12 | mm |
| Width | B | 10 | mm |
| Basic static load rating, radial | C0r | 3,550 | |
| Limiting speed | nG | 14,800 |
| Outside diameter | D | 32 | mm |
| Basic dynamic load rating, radial | Cr | 7,900 | |
| Fatigue load limit, radial | Cur | 248 | N |
| Minimum diameter of shaft shoulder | da min | 16.20 | mm |
| Maximum diameter of housing shoulder | Db max | 29.60 | mm |
| Maximum fillet radius of housing | ra1 max | 0.30 | mm |
| Maximum diameter of housing shoulder | Da max | 27.80 | mm |
| Maximum fillet radius of shaft | ra max | 0.60 | mm |
| Minimum chamfer dimension | rmin | 0.30 | mm |
| Caliber diameter on outer ring wide side face | D2 | 25.90 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 19.80 | mm |
| Distance between the apexes of the pressure cones | a | 14 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 24.60 | mm |
| Caliber diameter on outer ring small side face | D3 | 28.80 | mm |
| Caliber diameter on inner ring wide side face | d2 | 17 | mm |
| Contact angle | α | 40 | ° |
