| Bore diameter | d | 440 | mm |
| Width | B | 74 | mm |
| Basic static load rating, radial | C0r | 990,000 | |
| Limiting speed | nG | 1,510 |
| Outside diameter | D | 600 | mm |
| Basic dynamic load rating, radial | Cr | 500,000 | |
| Fatigue load limit, radial | Cur | 25,500 | |
| Reference speed | nϑr | 920 | 1/min |
| Minimum diameter of shaft shoulder | da min | 454.60 | mm |
| Maximum diameter of housing shoulder | Db max | 593 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 585.40 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 500 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 540.50 | mm |
| Distance between the apexes of the pressure cones | a | 187 | mm |
