| Contact angle | α | 30 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 351 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 123 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 368 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 394 | mm |
| Minimum diameter of shaft shoulder | da min | 330.20 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
| Maximum diameter of housing shoulder | Da max | 389.80 | mm |
| Reference speed | nϑr | 1,340 | |
| Fatigue load limit, radial | Cur | 10,300 | |
| Basic dynamic load rating, radial | Cr | 210,000 | |
| Outside diameter | D | 400 | mm |
| Limiting speed | nG | 2,310 | |
| Basic static load rating, radial | C0r | 335,000 | |
| Width | B | 38 | mm |
| Bore diameter | d | 320 | mm |
